close
Advertisement
Shop Now
Magazine

How to build a retaining wall – fast!

DIY expert Frank Gardner needed to find a simple system for installing a retaining wall in a just a day.

How to build a retaining wall – fast!
Reader's Digest

DIY expert Frank Gardner needed to find a simple system for installing a retaining wall in a just a day.

‘The wall had to go up before the house extensions blocked access to the yard so I had to move fast,’ says Frank.
 
‘I found the Retain-iT system at the hardware store and liked how the galvanised posts would look with pine sleepers. I added pine capping and a set of wide steps.’
 
How to build a retaining wall – fast!

To start, establish the line of the wall, excavating 200mm behind it, then use a laser level or dumpy to set the finished height of the wall either end, setting out a stringline as a guide. 
 
‘Be sure to install drainage behind the wall using geotech filter cloth, agflo pipe and gravel,’ says Frank.
 
TIP Check local council regulations as many allow a wall up to 600mm high to be built without approval.
 

Calculating the materials

‘I went three sleepers high and opted for a sleeper thickness of 75mm for strength and less timber flexibility.
 
‘The posts were concreted into the ground at a maximum of 2400mm apart on the sandy site,’ says Frank.
 
Measure the length of the wall, setting the posts to match the sleeper sizes. Multiply the spacings between posts by the number of vertical sleepers to find how many you need.
 
‘I worked out I need 15 sleepers 2400mm long plus six each of 1200 and 1800mm for about 16 metres of wall with steps set in one panel.’

How to build a retaining wall – fast!

How to install a retaining wall

Step 1. End posts and joiner posts
Step 1. End posts and joiner posts
Reader's Digest

Excavate two 550mm deep holes for the end posts, pour in concrete to 600mm from the top, use a spirit level to check for plumb in both directions then check the post is the right height. TIP A 20kg bag of cement mixed with gravel and sand fills three holes.

Next, set up a stringline to use as a guide then position a base sleeper in each end post. Position the joiner posts then dig 550mm deep holes and concrete them into position using a spirit level to plumb, aligning them with the stringline and leaving to dry.



Be inspired by the world's most creative designers

Be inspired by the world's most creative designers

Be inspired, people. The creative minds behind these storage and living solutions are truly ahead of their time.
How to Build an A-Frame Chicken Coop

How to Build an A-Frame Chicken Coop

Every backyard chicken needs a place to call home. Here's a step-by-step guide to providing yours with an attractive A-frame coop – built by your own hands!
Which plants are perfect for keeping in the bathroom?

Which plants are perfect for keeping in the bathroom?

An easy way to liven up the bathroom is to add indoor plants. But which are the most successful and popular plants to thrive in such an environment?
Build a Bookcase With Dad

Build a Bookcase With Dad

Spend Father’s Day in the workshop and pass on your DIY woodworking skills to the next generation. Here’s a simple project that gives your child the chance to spend the day with Dad and get hands-on DIY experience.
How to Build a Dry Stone Wall

Advertisement